Accessories
Pressure transducer adaptor
- Part number: PTA Accessory kit comprising of a brass self sealing test plug, stainless steel hypodermic insertion probe and sensor-to-insertion probe seal.
- Test plug Brass 1/4" BSP with self sealing rubber inner
- Hypodermic insertion probe Stainless steel insertion probe 2mm diameter, 90mm long with G 1/4 female pressure connection. Maximum pressure 6 bar.
Thermocouple sensor
Part number: 10B-Class 1-T-5-CAP Class 1 type T exposed junction sensor, 1/0.3mm PTFE flat pair leads 5m long. Sensor end cap reduces water ingress.
Thermocouple connection loom
Part number: TJA-8-T Assembly to avoid water leakage with 8x type T plugs and sockets linked by 50cm of class 1 type T PTFE insulated cable.
Thermocouple welder
Part number: SR48 Fine wire capacitive discharge welder for two wire up to 1mm diameter. Produces a repeatable welded thermocouple junction.
Thermocouple cable
Part number: 2D-Class 1-T-100 Class 1 type T cable, 1/0.3mm PTFE flat pair
Part number: 2E-Class 1-T-100 Class 1 type T cable, 1/0.5mm PTFE flat pair
Part number: 2C-Class 1-T-100 Class 1 type T cable, 7/0.2mm PTFE flat pair
Thermocouple connectors
Part number 5A-T Miniature type T plug
Part number 5B-T Miniature type T socket
The contents of this site are © Anville Instruments Ltd 2007 and may not be reproduced without written permission. "EaziVal" is a trademark of Anville Instruments Ltd. All other brand and product names are trademarks or registered trademarks of their respective owners.
