Ashcroft pressure transducer and pressure calibrator
For pressure sensor calibration of the complete EaziVal system the pressure of the transducer must be maintained at a stable value. EaziVal provides multi-point calibration at 'high', 'low' and 'check-point' pressure with the scale and offset values calculated for each pressure sensor. The Ashcroft D1005-TP1 pressure calibrator provides fast pressure change enabling rapid setting of the three pressure set points.
Ashcroft KXDHT pressure transducer
- Part number KXDHT
- Pressure range -1 bar to 4 bar gauge
- Accuracy ±0.25%
- Span thermal drift ±0.03%/°C
- Repeatability 0.03% full scale
- Median temperature range -30°C to 150°C
- Operating temperature range -30°C to 85°C
- Over pressure limit 10 bar
- Signal output 4-20mA
- Power supply 24VDC from Anville data logger
- Process connection G 1/4" male
- Process connection material Stainless steel 3 16Ti
Ashcroft PDTG3089-CP916 pressure calibrator
- Part number PDTG3089-CP916
- Pressure range -0.950 bar to 4 bar gauge
- Accuracy ±0.05% (total error band)
- Over pressure limit 8 bar
- Display units mbar, bar, PSI
- Display 5 digits
- Indicator dimensions 43mm deep x 80mm diameter
- Power supply 3AAA batteries, 1000 hour life
- Operating ambient -18°C to 63°C
Total error band accuracy includes linearity, hysteresis, temperature and repeatability errors and that all readings from zero to full scale are within the stated accuracy.
Supplied with TUV (UKAS) traceable factory calibration certificate at -0.9, 0, 1, 2, 3 and 4 bar.
The contents of this site are © Anville Instruments Ltd 2007 and may not be reproduced without written permission. "EaziVal" is a trademark of Anville Instruments Ltd. All other brand and product names are trademarks or registered trademarks of their respective owners.
