• Hospital validation
  • Thermal validation
  • Thermal validation test sets
  • Series 825 Thermal Validation Interface
  • Series 425 data loggers
  • EaziVal software
  • Temperature bath
  • Temperature calibration
  • Pressure calibration
  • Steam quality testing
  • Testing accessories
  • Sensor accessories
  • Operator training
• Pharmaceutical testing
  • Thermal validation
  • Thermal validation test sets
  • Series 825 Thermal Validation Interface
  • Series 425 data loggers
  • Series 500 data loggers
  • EaziVal SE and SE+ software
  • Temperature baths
  • Temperature calibration
  • Pressure calibration
  • Operator training
• Transit logging and process monitoring
  • Gemini PL105 single channel logger
  • Transit logger calibration
  • Series 625 monitoring system
  • Prodigy software
• Understanding thermal validation
  • Measurement uncertainty in thermal validation
  • Anville data logger measurement uncertainty
• Links
• Support and downloads
• Contact details

Techne liquid temperature calibration baths

Calibration of the PL-105 data logger requires total immersion of the data logger in a liquid bath maintained at a stable, known temperature. A techne 8 litre liquid bath fitted with a Techne TE-10D thermo-regulator has a calibration temperature range from 40°C to 120°C. The liquid can be either water if temperatures do not exceed 95°C (for washer-disinfector calibration) or silicone oil for temperatures up to 120°C.

The bath temperature is measured with a UKAS calibrated Anville series 275 reference thermometer.

Part number FBATH08 Stainless steel bath with 8 litre capacity.
Part number FFLAT08 Stainless steel lid.
Part number FTE10DDC Thermo-regulator with digital display of set point, operating range 40°C to 120°C. The bridge mounting plate has an entry port of 6.5mm diameter for the 275 Pt100 sensor.